The uc flatbed printer is a high-tech product, and its application advantages are very obvious, but irregular operations usually cause damage to the equipment, and also affect the printing quality of the equipment. What are the wrong operations that we need to pay attention to and avoid in our daily lives? ? Let’s learn about it today:
1. Don't adjust the nozzle brute force
No matter whether it is changing or adjusting the print head, do not use brute force, you need to treat the printer print head carefully according to the standard;
2. Don't change the circuit at will
Disassemble the circuit of the uv flatbed printer at will without turning off the power switch and cutting off the main power supply. This situation will damage the service life of each system and also damage the print head;
3. Don't neglect the work ground
The printing of uv printers is greatly affected by static electricity, so you should always check the connection of the ground wire equipment, and regularly sprinkle a little salt water around the ground wire;
4. Do not clean the power supply that has not been turned off
When cleaning, you need to pay attention to the uv printer circuit board and other internal systems. When cleaning, you need to turn off the power first, and be careful not to let water touch the circuit board and other internal systems;
5. Do not clean the nozzle under high pressure
When cleaning the uv printer nozzle, if the nozzle is blocked, it is recommended to use a vacuum cleaner to wash out the dust before cleaning;
6. Do not use inferior cleaning fluid
Use inferior cleaning fluid to clean the nozzle. The nozzle is very susceptible to contamination and wear. Therefore, it is necessary to clean the nozzle with products that meet the quality recommended by the manufacturer;
7. Do not soak and clean the nozzle
Although immersing the nozzle in the cleaning fluid for a long time can clean the stains more effectively, the cleaning fluid is also corrosive. If the time exceeds 48 hours, it will affect the nozzle orifice of the uv printer. Therefore, conventional In this case, you only need to take an appropriate amount and introduce it into the nozzle for cleaning.
