Black and white board luminous characters is a kind of acrylic material, which uses LED energy-saving lamps as the light source to make luminous characters. It is rarely used in our lives, and the most representative is the signboards of major Chinese banks, such as Bank of China, Industrial and Commercial Bank of China, and Huaxia Bank.
During the day, the characters are black, and at night, the characters can appear bright white through the light transmission. Acrylic with this characteristic is called "black and white board".

The LED lights with luminous characters on the black and white board should be installed very densely. This is determined according to the characteristics of the black and white board material. If you install less LED lights in order to save LED lights, it is very easy to produce shadows and affect the effect.
installation method:
1. The acrylic panel and the bottom plate of the luminous characters are punched and folded after the overlap. The bottom plate of the advertising word---chevron board is fixed on the advertising chassis with screws or special glue. Adjust the spacing and height of the words. good.
2. Connect the power line, the white line (- pole) and the gray line (+ pole) of the advertisement word to the main line (two wires) in parallel.
3. Referring to the transformer connection diagram, connect the 220V power supply of the household power cord to our transformer, N and C ports.
4. After the green light of the transformer is on, connect the positive and negative white lines (- pole) and gray lines (+ pole) of the advertising word LED to the corresponding interfaces marked with + - on the transformer respectively. Adjust the positive and negative LEDs of a single word until all LEDs are on.
5. Cover the acrylic panel that was broken down in the first step. The acrylic panel and the bottom plate are fixed with screws, and the surrounding area is sealed with transparent silicone. Word is installed.






