How To Tone Uv Dtf Printing Machine

The color matching of Uv Dtf Printing Machine mainly starts from two aspects: adjusting the picture processing software and testing the design skills of the operators. And through the digital direct jet printing machine with matching printing software adjustment.
First, use picture processing software for color adjustment
Uv Dtf Printing Machine prints usually have a certain color difference with the original picture. Different patterns and color differences may vary. When this color difference is not acceptable, we often choose to use image manipulation software to match the color, which is a common AI, PHOTOSHOP, etc. After adjustment, try printing on the computer, and then compare with the original drawing, so reciprocating, until close to the original drawing so far, this test is the operator's design skills and patience.
Two, through the print control, color control software
The printing control software matching the digital direct jet printing machine also has a simple color adjustment function, but this adjustment range is limited, can only adjust the style of the whole picture, such as darker and bluer, can not be locally adjusted, so it is rarely used like chicken rib.
Naturally, no matter how much you mix, you can't get enough of it, and this can happen for the following reasons:
1, ink color concentration
When ink concentration is low, printing dark, no matter how to adjust can not reach a satisfactory degree. Let's say you want to print dark black, but the black ink concentration is just too low. No matter how you mix it, it's always light black.
2. Curve
When the ink does not match the Uv Dtf Printing Machine's board card and RIP software, the printed pattern will have a large color difference, no matter how you adjust the color, it is impossible to approach. This usually happens after replacing the ink brand and model.
3. Waveform
The waveform also has a significant effect on the pattern, which usually depends on the board vendor.